 |
Construction and detail
Contur 600/625 |
| Suspension system
The spacer bars shall be fixed max. 100 mm from the hangers. At joints of main T-runners, hangers shall be fixed. The suspension hanger must be fixed to the main runner at 1500 mm centres and not less than 100 mm from the wall angle.
Components
Suspension grid, hangers etc. are made from galvanised steel. The exposed sections are painted in CMC 001 Global white (equivalent to NCS 0902 G48Y).
| |
|
|
| MAINRUNNER
| SPACER BAR
| SHADOW EDGE TRIM
| WALL ANGLE
| | | | | | Part no.
| 85030
| | W x L x H
| 24 x 3600 x 38
|
| | Part no.
| 8260013
| | L
| 600
| | Part no.
| 8269913
| | L
| 300
|
| | Part no.
| 1459
| | W x L x H
| 10+24x3050x12+19
|
| | Part no.
| 1438
| | W x L x H
| 19 x 3050 x 32
|
|
| ADJUSTABLE HANGERS
| | Part no.
| Length
| | 11022
| 120- 200
| | 11030-99
| 200- 270
| | 11030
| 250- 320
| | 11040
| 250- 440
| | 11070
| 380- 690
| | 11090
| 500- 940
| | 11120
| 750- 1210
| | 11150
| 750- 1440
| | 11200
| 1000- 1940
|
| |
|
| | | Cross section 1, Contur 600, with painted fix frieze of gypsum board screw-fixed on 35 mm T-profile.
Drawing no.: 10.2.001
| Cross section 2, Contur 600, with painted fix frieze of gypsum board screw-fixed on 35 mm T-profile.
Drawing no.: 10.2.002
|
| | | Longitudinal section, Contur 600, with painted fix frieze of gypsum board screw-fixed on 35 mm T-profile.
Drawing no. 10.2.003
| Longitudinal section, Contur 600, with shadow edge trim.
Drawing no. 10.2.004
|
| | | Cross section 3, Contur 600, with shadow edge trim.
Drawing no. 10.2.005
| Cross section 4, Contur 600, with shadow edge trim.
Drawing no. 10.2.006
|
|
|
