Markant 600
|
|
|
| Wall rail 5110 is secured to the wall for every 400 mm 13 mm above the finished ceiling level. | |
Girder section is installed for every 1200 mm by pushing the section into the wall panel and slinging it from the ceiling. Subsequently cross-sections (85430 and 85230) are installed to the Markant ceiling in 600 x 600 gridsystems.
| |
| Frieze profiles
Cross-section (6442069) is cut and installed to the grid section / cross-section and into the wall panel for every 600 mm. If the frieze width exceeds 300 mm, the cross-section is installed for every 300 mm.
| |
Tectopanels, which have bevelled edges, or building boards for filling with edge rail KS13 are used as frieze tiles.
Both boardtypes are screwed into the wall rail and cross-section (6442069). Check the angle and perforation against opposite friezes, which is important on account of the subsequent installation of elements in the acoustic section.
| |
| Drawing no. 20.2.002
|
| Drawing no. 20.2.005
|
| Frieze of Tectopanel on system 650. |
| Frieze of building board with KS13 edge rail for filling. |
